Choosing the right profile and how to arrange the waffle mold

Choosing the right profile and how to arrange the waffle mold : Let’s check the selection of the right profile and the way to arrange the waffle mold with each other in the PSP company (manufacturer of waffle roof and waffle mold).
It is not suitable to use the tube on the top grid or tubular and circular profiles because the waffle seat works very poorly on these circular profiles and occupies a small area.

For this reason, the suggestion that exists is that if a pipe is used, two pipes should be placed under each waffle, while if you use a profile, square or any other sections in a square or rectangular shape, as the top surface The work is smooth and it is possible to sit the bases or the place of the beams of the waffle molds on that profile, they make them perform much better than the circular profiles.

Choosing the right profile and how to arrange the waffle mold

For this reason, the use of rectangular and square sections is preferred in the construction of the waffle roof, and the way it is arranged depends on the type of roof. For example, if you use a one-sided waffle ceiling Ax 60, you should place the top profile at a distance of 60 cm by 60 cm. Also, they should be arranged so that the placement of two waffle molds next to each other is the same as the profile.

The use of different types of profiles and dimensions required for that has a separate category. The underlayment of the waffle roof depends on factors such as the thickness and load of the building. Therefore, it is much more common to use profiles in dimensions of 40 x 60 and 40 x 80 and it is recommended to use them.

Choosing the right profile and how to arrange the waffle mold

If you are planning to choose a waffle mold and a waffle roof, we are the experts and engineers of PSP (waffle roof and waffle mold manufacturer) ready to advise and cooperate with you.

You can also follow more activities of PSP company on Instagram.